User’s Guide Paper and Media Handling Note: ❏ Leave enough space in front of the product for the paper to be fully ejected. ❏ Do not remove or insert the paper cassette while the product is operating. Into the rear paper feed slot Note: Even though you can print on paper with a thickness of 0.05 to 0.6 mm, some hard paper may not be fed correctly even if the thickness is within this range. A Send your print job to the product (from your computer, or by using the control panel). Note: Before sending your print job, you cannot load paper into the rear paper feed slot. B Open the rear paper feed slot cover. C Slide out the paper support, and then extend and tilt it backwards. 30