Evada User manual E48600 10U ENG

 User Manual Statement:1. Before installation, please read this user manual carefully and comply with relevant industry safety regulations. The company will not be responsible for any damage to the products caused by operation failure. 2. Before connecting the rack type power supply system with the battery, please make sure that the parameters of the battery, such as capacity, equalizing charging voltage, floating charging voltage and charging current limiting coefficient, are set correctly according to the actual values. 3. Due to product version upgrade or other reasons, the contents of this manual will be updated from time to time; unless otherwise agreed, this manual is only for use guidance, and all statements, information and suggestions do not constitute any warranty. Prohibit stop matter term1. Do not contact the system input high voltage components directly or indirectly through wet objects. 2. Personnel without relevant professional qualification are not allowed to carry out various high-voltage operation of the system. 3. When the system operator is conducting high voltage power on or debugging, do not wear various metal hand ornaments. 4. Do not operate high voltage and alternating current in thunderstorm weather. 1. The switch and circuit breaker which are not allowed to be operated in connection with each other during installation must be hung with the sign of no closing. 2. Please check the AC input voltage before and after power on to ensure that the input voltage of power supply equipment is within the normal working voltage range. 3. AC lead-in and load equipment wiring, please ensure the correctness and firmness of wiring. 4. When inputting DC source, please be sure to follow the positive and negative access marked on the silk screen of MCB. 5. Before power on, the system must be reliably grounded. 6. In order to prevent electric coupling, AC cables shall be laid separately from DC cables. 7. This product is a large leakage current equipment, please do not connect the leakage current protection switch in the front end when connecting the power supply, which is easy to cause tripping. 8. Please turn off the power supply immediately when you find water or moisture in the cabinet. 9. This product has no battery reverse connection protection function. Please ensure the battery polarity connection is correct before closing the battery switch.Abide by Shou matter termNote: The company reserves the right to change without notice.Attachment 1: Layout plan Attachment1 2: Wiring drawingTable of Contents1. Equipment installation and commissioning ....................