Ethernet Communication Module IFD9506 Step 3: If you want to control the On/Off of Y0 (Y0 address: 0500) of PLC at station address 0x0001 and On/Off of Y0 (Y0 address: 0500) of PLC at station address 0x0003, select “Maintained” button and create the button on the screen. Step 4: Create two “Maintained” buttons. (a) Click on the button on the left hand side first. You will see the information of the button in the “Property” window on the right hand side of the screen. Click on “Write Address” to set up the address of Y0 (0500) and the address of the PLC (1). Select “Base Port” in “Link” column and “RWB-“ in “Device Type” column. (b) Next, set up the button on the right hand side .
Follow (a) step and modify the address of the PLC as “3”. DVP-PLC Application Manual 46