Operation Communication on the DeviceNet network is indicated by the SmartLinx LED’s. Error Status LEDs AiRanger / SITRANS LU Series, CraneRanger, InterRanger DPS 300. Refer to the following diagram to view the error status LEDs. There are three LEDs on the DeviceNet circuit card. LED 1 is furthest from the card’s edge, LED 2 is in the centre and LED 3 is closest to the edge. Operation 7ML19981BH02 SmartLinx DeviceNet – Instruction Manual Page 9 LED 1 power status po LED mo LED net po LED mo 2 dule status LED net 3 work status LED Status of:
Condition Indication Flashing green Module is initializing 1 Power Solid green Module is ready 2 Module Flashing green Solid green Flashing red Solid red Module is configuring Module is configured Recoverable fault Critical fault Flashing green On-line but not connected 3 Network Solid green On-line and serviceable link Flashing red Recoverable fault