Factoring In order to calculate the value of a new or unknown test weight to the current span, the factoring procedure is used. Note: For optimum accuracy in the factoring results, a routine zero calibration is recommended. Refer to Maneuvering on page 18 for parameter selection and value change. With the conveyor stopped and the belt empty: P359 selected enter initiated Factoring, current test load value e.g. 76.11 kg / m hang new test weight onto belt scale, then run the conveyor empty dynamic test load value e.g. 76.03 kg / m jumps to P017 dynamic test load value e.g. 76.03 kg / m Recalibration return to run mode 1 2 Page 38 Milltronics BW100 - INSTRUCTION MANUAL 7ML19985DJ01