Safety Notes Introduction Special attention must be paid to warnings and notes highlighted from the rest of the text by grey boxes. WARNING means that failure to observe the necessary precautions can result in death, serious injury, and/or considerable material damage. Note: means important information about the product or that part of the operating manual. The Manual It is essential to refer to thismanual for proper installation and operation of your BW100 belt scale integrator. As the BW100 must be connected to a belt scale, and optionally a speed sensor, refer to their manuals as well.
The manual is designed to help you get the most out of your BW100, and it provides information on the following • How to install the unit • How to program the unit • How to operate the keypad and read the display • How to do an initial Start Up • How to optimize and maintain accurate operation of the unit • Outline diagrams • Wiring diagrams • Parameter values • Parameter uses • Modbus register mapping • Modem configuration Note: The Milltronics BW100 is to be used only in the manner outlined in this instruction manual. If you have any questions, comments, or suggestions about the manual contents, please email us at techpubs@siemens-milltronics.com.
For the complete library of Siemens Milltronics manuals, go to www.siemens-milltronics.com. Page 2 Milltronics BW100 - INSTRUCTION MANUAL 7ML19985DJ01