The separation rollers that are not blue on the end will not be replaced. 3 On the end of each roller, pinch together the release lever and handle between two fingers and slide the roller off of its spindle. Set the rollers aside. 4 While holding the new roller by its handle, slide the roller onto the spindle until it clicks into place. Repeat this procedure for the other three rollers. 5 Replace trays 3 and 2. Note Trays 2 and 3 are not interchangeable. 6 If an optional 2,000-sheet input unit is not attached to the printer, proceed to step 9. If a 2,000-sheet input unit is attached, open the vertical transfer door on the right side of the printer. EN Printer consumables 131 2 3 4