Cleaning and care L OOKING AFTER THE APPLIANCE Metal-mesh grease filters Suitable cleaning agents and care products for your appliance can be purchased via the Hotline or from the Online Shop (see cover page). The metal-mesh grease filters absorb the grease particles from the kitchen fumes. The filter mats consist of fire-proof metal. RISK OF FIRE As the filters become more saturated with greasy residue, the flammability increases. The function of the extractor hood may also be impaired. Appliance surfaces NOTE: Observe the warranty regulations in the enclosed service booklet. The appliance surfaces and controls are scratch-sensitive.
Therefore observe the following cleaning instructions: – Avoid cleaning the extractor hood with dry cloths, abrasive sponges, scouring agents, cleaning agents containing sand, soda, acid, chlorine or any other aggressive substances. – Clean the appliance surfaces and controls with a soft, damp cloth, washing-up liquid or a mild window cleaner only. – Do not scrape off dried dirt, but moisten with a damp cloth. – Clean carefully in the area of the controls to avoid liquid from getting into the electronics. The risk of fire is prevented by cleaning the metal-mesh grease filters in good time.
When cleaning the grease filters, also remove grease deposits from the accessible parts of the housing with a damp cloth. Cleaning the metal-mesh grease filters ... Under normal operation (daily 1 to 2 hours), the metal-mesh grease filters must be cleaned 1x month. ... in the dishwasher The metal-mesh grease filters can be cleaned in the dishwasher. Slight discolouration may occur but this will not affect the function of the grease filters. The filters must be placed loosely in the dishwasher. They must not be wedged in. NOTE: Clean the stainless steel surfaces in the direction of the ground surface only! Do not use stainless steel cleaner for the control buttons! NOTE:
Do not clean heavily saturated metal- mesh grease filters together with utensils. ... by hand When cleaning by hand, soak the grease filters in a hot detergent solution, brush off the dirt, rinse thoroughly and leave to dry. Do not use any aggressive, acidic or alkaline cleaning agents. If dirt is particularly stubborn, we recommend using a special grease solvent spray. This can be ordered via the Online Shop. 10