DeviceNet Slave Communication Module IFD9502 3.5 When IFD9502 is connected to Delta DOP-A series human machine interface DVP28SV DVPDNET-SL Master Delta DOP-A HMI F1 F2 F3 COM1 COM2 RS-232/RS-485 communication DeviceNet 1. Baud rate and the setting of communication format z Before connecting the Delta HMI to bus, set the node address of HMI as 01 and the invalid). communication format as 115,200; 7, E, 1; ASCII (the format is fixed; other formats will be z When IFD9502 is connected to Delta DOP series HMI, please set up the baud rate and format following the procedure listed below. „ Open software Screen Editor and select “File>>New”. You will see the dialog box as below.
1 „ Follow 1 and set the Base Port Controller to “Delta DVP PLC”. Click ”OK” to create a new file. „ Select “Options>>Configuration>>Communication” and you will see the dialog box as DVP-PLC Application Manual 19 DVPDNET DVP28SV RUN STOP