00-50 POWER TAKE OFF NPA0119E NPA0121E Legend 1. Gear case 2. Oil seal Legend 1. Rear ball bearing 5. Shift Arm 3. O-Ring Thinly coat the O-ring and the O-ring groove of the gear case with lithium grease (BESCO L-2 or equivalent) and firmly assemble them in the groove so that there will be no damage and tor- sion. Assemble the shift arm in the gear case. 6. Shift Rod Thinly coat the shift rod with lithium grease (BE- SCO L-2 or equivalent) and insert it in the gear case, then assemble it in the shift arm. Notice: Align the assembly direction of the shift arm to the align- ment mark at disassembly. NPA0120E Legend 1. O-ring 2. O-ring groove NPA0122E Legend 1. Alignment mark 2. Shift arm 3.
Shift rod 4. Rear Ball Bearing Strike and install the rear ball bearing in the gear case from the inner side of the case. Bearing installer: 5-8840-2432-0