Appendix A Display Settings The Monitor Settings Menu allows setting of parameters that are specific to the display unit. Some settings such as Language and Lighting will be communicated to the other displays.
Display Description Function MENU HOT KEYS LOCK Controls the actions of the keys UNITS Sets a variety of units to suit the operator LANGUAGE Sets the language the unit will display TACH RNG 0-5000 Sets the tach range SPEED Allows adjustments to speed readings if available DEPTH OFFSET Allows adjustments to depth readings if available DEFAULT MONITOR Returns the unit to the default settings BEEPER ON Turns the key beeper on and off ABOUT Supplies information about the display Menus This menu controls the key functions. There are three choices. 1. When the Pop-Up Menus feature is selected (drawing at right), the unit functions like a typical computer.
A key push brings up a menu and you then use the keys to make a series of selections. This is the mode that allows new screen set ups to be selected and any screen to be accessed. 2. The Hot Key Locked selection allows keys 1, 2, 3, and 4 to be assigned as favorite screens. Pushing the key immediately brings up the selected screen. This mode will not display the right arrow over key 5. Thus the screens are locked when this is selected. This is the factory default setting. 3. The Hot Key selection allows keys 1, 2, 3, and 4 to be assigned as favorite screens. Pushing the key immediately brings up the selected screen. This mode will display the right arrow above key 5.
That arrow allows the user to select various data inputs in the various sections of the screen. Electronic Control System: Operation Manual for BY Series Engines with Unlimited Controls © Yanmar 2008 Page 19