. OPERATION EXPLANATION OF COMPONENTS REVERSING TAPE When listening to the tape, press both FAST FORWARD, REWIND buttons (A) and (B) at the same time lightly. When this is done, the tape direction display will be reversed. PRECAUTIONS WHEN USING WARNING 3 - 77 If a voltage greater than the spe cified voltage is input, it may cause fire, electrocution, or other failure. Ne ver input any voltage other than the specified voltag e. er high voltage. Do not remove the cover. ons. This may cause fire, electrocution, or other failure. nothing is displayed, or any other problem occurs, turn off the power switch and ask your pairs without delay.
Places inside the radio are und Do not carry out any modificati If the sound cannot be heard, Komatsu distributor to make re Stow the antenna when trav eling in places with low overhead clearance. ther machines. To ensure safety during ope rations, keep the volume at a level where it is possible to hear o If water gets inside the spea ker case or radio (auto tuning), it may cause a serious problem, take care not to let water get in these items. Do not wipe the scales or b uttons with solvent such as benzene or thinner. Wipe with a dry s oft cloth. If the dirt cannot be removed easily, s oak the cloth with alcohol.
NOTICE Handling cassette tape ce a month with a commercially available head cleaning tape. Clean the tape head approx. on Do not leave the tape any place where it is exposed to direct sunlight, any place that is excessively dust y, or any place where there is a magnetic field. he tape is thin and it easily gets caught up inside the machine. s caught up inside the machine. Use a pencil to wind in the tape to remove any slack. Do not use 120-minute tapes. T If the tape is slack, it easily get s caught up inside the machine. Use a pencil to wind in the tape to remo Do not use any cassette tape if t he label has started to come off.
It may cause defective rotation, or it may be impossible to get the tape out of the machine.