. OPERATION OPERATION LEVELING OPERATIONS NOTICE Always operate the machine in reverse when carrying out leveling operations. PUSHING OPERATION CAUTION LOAD AND CARRY OPERATIONS WARNING 3 - 142 If it is necessary to carry o ut leveling operations when t raveling do not set the bucket du Turn the E.C.S.S. OFF wh 1. Scoop soil into the bu cket. Move the machine b ackwar d while spreading soil from t 2. Go over the spread s oil with the bucket teeth t ouching the ground and level the ground 3. Scoop some more so il into the bucket, put the lif t arm co ntrol lever in FLOAT position, lev level, and smooth th e ground by moving backward.
Never set the bucket to the DUMP position when carrying out pus When carrying out pushi ng operations, set the bottom of t he bucket parallel to the ground s When carrying a load, lo wer the bucket to lower the center o f gravity when traveling. When the machine is tra veling or the work equipment is raised, the moment that the E.C.S.S. switch is turned ON, the work equipment will move. out with the E.C.S.S. switch left at the ON at the E.C.S.S switch is turned ON, the work If operations are carried position, the moment th equipment will move. The load and carry meth od for wheel loaders consists of a cycle of scooping -> hauling -> truck, etc.). ath properly maintained.
Always keep the travel p When using the load and carry method, see "PRECAUTIO NS FOR USING LOAD AND CA 3-154)".