CAB AND FRAME 2-85 Installation 3. Tighten the cab stay pin fixing nut to the specified torque. For installation, reverse the removal procedure taking the following points into consideration. 1. When installing the cab stay (4) to the cab side bracket (1), completely fit the cab stay pin (2) to the bracket square hole (3). 2. Assemble the washer (5) convex to face the nut side. Tighten: Cab stay pin fixing nut to 22 N m (2.2 kg m/16.2 lb ft) 4. Tighten the cab stay frame side fixing bolt to the specified torque. Tighten: Cab stay frame side fixing bolt to 40 N m (4.1 kg m/29.5 lb ft) N2A0139E Fixing Torque N2A0140E