CAB AND FRAME 2-87 Installation For installation, reverse the removal procedure taking the following points into consideration. 1. When installing cab lock assembly (1) to the rear mounting (2), install the LH and RH cab lock as- sembly, and tighten the nuts in the following se- quence. First, temporarily tighten A, then tighten B to D to the specified torque, and lastly tighten A firmly. Tighten: Nut to 19 N m (1.9 kg m/14.0 lb ft) N2A0142E 2. Install the hook rod assembly (3) and handle lever hook rod (2) and adjust. Move the control lever (1) “a” to “b”. While hold- ing “c” attached to the bracket (4), adjust the lock nut “e” and “f”.
And then tighten to the specified torque so that both “c” and “d” contact to the bracket. Tighten: Lock nut to 13 N m (1.3 kg m/9.6 lb ft) N2A0143E