3 i5601E Digital Display Factory Settings ENG Data 1, Data 2, Data 3, Data 4 The Engine Data 1 thru Data 4 displays presents the Tachometer large gauge along with two smaller gauges on the right side. The right hand side gauges are selectable from the list of engine gauge displays (see prior page). The Tach window functionality is the same as described in the above section for the Large Tach. The “Status” window provides engine information when appropriate: The new command acknowledgement window – status window a ppears when there is information to be displayed. This window will appear on all Eng Tach screens.
if there is more than one message to display, only the highest priority message is shown. © 2011 Yanmar Marine International • Rev. 2.0 Yanmar Electronic Control Systems Technical Manual 3:49