SAFETY GENERAL PRECAUTIONS WARNING: Failure to follow these safety precautions may lead to a serious accident. EMERGENCY EXIT FROM OPERATOR’S CAB If it should become impossible to open the cab door, open the rear window and use it as an emergency escape. Remove the rear window as follows. 1. Pull ring (1) and completely remove seal (2) from the window frame rubber. 2. Push the corner of the rear window glass strongly to push it out and make it possible to remove. Remove the rear window only when it is being used as an emer- gency escape. ROTATING BEACON (OPTION) When the machine is operated on or beside a road, a rotating beacon is required to avoid a traffic accident.
Contact your Komatsu distributor to install beacon lamp. ELECTROMAGNETIC INTERFERENCE When this machine is operating close to a source of high electro- magnetic interference, such as a radarstation, some abnormal phenomena may be observed. The display on the monitor panel may behave erratically. The warning buzzer may sound. These effects do not signify a malfunction and the machine will return to normal as soon as the source of interference is removed. 25