OPERATION Swing Lock Monitor This monitor (2) informs the operator that the swing lock has been actuated. When actuated: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lights up The monitor lights up when the swing lock switch is turned to the ON (LOCK) position. The monitor flashes when the swing holding brake release switch is turned ON. For details of the positions of the swing holding brake release switch, See “CONTROLS AND GAUGES” on page 2-3. Remark The swing motor is equipped with a disc brake that mechanically stops the rotation. When the swing lock monitor is lit up, the brake remains applied. Wiper Monitor Monitor (3) indicates operating status of the wiper.
The monitor display when wiper switch is operated, as follows. When ON lights up: . . . . . . . . . . . . . . .Wiper moves continuously When INT lights up: . . . . . . . . . . . . . . Wiper moves intermittently OFF:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Wiper stops For details of the positions of the wiper switch, See “CONTROLS AND GAUGES” on page 2-3. Auto-deceleration Monitor Monitor (4) shows if the auto-deceleration is being actuated. The monitor display when auto-deceleration switch is operated, as follows. Auto-deceleration monitor ON: . . . . . Auto-deceleration actuated Auto-deceleration monitor OFF:. . . .
.Auto-deceleration canceled For details of the positions of the auto-deceleration switch, See “CON- TROLS AND GAUGES” on page 2-3. PC200LC-8 2-19