TCD 2015 Cylinder head W 01-01-01 Setting valve clearance Commercial available tools: – Rotation angle disc . . . . . . . . . . . . . 8190 – Screwdriver insert for slot- ted screws. . . . . . . . . . . . . . . . . . . . 8191 – Open wrench size 13 . . . . . . . . . . . 8196 W 04-06-03 Allow the engine to cool down for at least 30 minutes before setting the valve clea- rance. Engine oil temperature – Locking agent DEUTZ DW 59 The following work process describes set- ting of the valve clearance on an exhaust valve. The setting procedure for an inlet valve is analogous under consideration of the specified rotation angle size. 6 Unscrew screws (1). Remove cylinder head cover (2). Remove gasket.
Attach turning gear. W 04-06-03 2 1 1 © 40627-0 Setting engine to valve overlap Turn crankshaft using the turning gear until the valve overlap of cylinder A1 is reached. T01 63 © 40463-1 © 06/2006 8150-001 1/4