OPERATOR'S STATION Selecting an Attachment from Main Menu 1. When the basic screen displays, push the menu key and display main menu. 2. Select work mode from main menu by using keys 1 and 2. Push determination key. Then, the work mode screen displays. 3. Push the key located under an attachment mark to be used in order to select the attachment. (In the right example, Breaker 1 is selected.) Basic Screen Menu Key M1J1-01-002 NOTE: When selecting Digging, return to Main Menu. 4. On the attachment specification screen, confirm if speci- fication of the installed attachment agrees with that dis- played on the screen. NOTE: When pushing the back key, return to the basic screen. 5.
Push the determination key, and the basic screen dis- plays. Back Key Determination Key Key 2 Key 1 M1J5-05-002 Digging Back Key Select Breaker 1 Work Mode Screen T1J7-02-01-002E Breaker 1 Maximum Pump Flow Rate Maximum Engine Speed 1700 260 L/min min -1 Valve Selector Accumulator 2-Speed Selector OFF 2ndary Hydraulic Relief Selector 1 2 3 4 5 6 7 8 9 0 F1 F2 F3 F4 Determination key Attachment Specification Screen T1JB-05-02-002E 1-23