7. PRECAUTIONS DURING OPERATION WARNING: For reasons of safety, always follow these safety precautions. PARKING MACHINE Park the machine on level ground where there is no danger of falling rocks or landslides, or of flooding if the land is low, and lower the work equipment. If it is necessary to park the machine on a slope, set blocks under the tires to prevent the machine from moving. When parking on roads, provide fences, signs, flags, or lights, and put up any other necessary signs to ensure that passing traffic can see the machine clearly, and park the machine so that the machine, flags, and fences do not obstruct traffic. When leaving the machine, lower the work equipment completely.
Then set parking brake lever 1 to the PARKING position, stop the engine, and use the key to lock all the equipment. Always remove the key and take it with you. Parking procedure © See “12.12 PARKING MACHINE”. Places to locks © See “12.16 LOCKING”. Always close the door of the operator’s compartment. 1-14