11. EXPLANATION OF COMPONENTS 2. LAMP SWITCH This lights up the head lamps, side clearance lamps, tail lamps, machine monitor lighting, and rear lamps. 1 OFF 2 g position: Side clearance lamps, tail lamps, rear lamps, machine monitor lighting light up 3 b position: The head lamps light up in addition to the lamps in the g position The lamp switch can be operated regardless of the position of the lever. 2. TURN SIGNAL LEVER This lever operates the turn signal lamp. 1 Right turn: Push the lever forward 2 Left turn: Push the lever back When the lever is operated, the turn signal pilot lamp also flashes. The lever is automatically returned when the steering wheel is turned back.
If the lever does not return, move it by hand. 2. DIMMER SWITCH This is used to switch the head lamps between high beam and low beam. A Low beam B High beam 3. CAUTION, PILOT LAMP BULB CHECK SWITCH Press this switch when the starting switch is at the ON position to check for any blown bulbs. AE617330 4. EXHAUST BRAKE SWITCH i position (OFF): The exhaust brake is actuated when the foot brake is depressed or the retarder control lever is operated and the torque converter is in the lockup condition. k position (ON): The exhaust brake is actuated when the ac- celerator pedal is released and the torque converter is in the lockup condition. 2-19