11. EXPLANATION OF COMPONENTS 7. BLADE CONTROL LEVER (POWER TILTDOZER) This lever is used to raise or tilt the blade. Lifting control a RAISE : ( 2 ) b HOLD : ( w ) Blade is stopped and held in this position. c LOWER : ( s ) d FLOAT : ( x ) Blade will move freely according to external force. REMARK When released from FLOAT position, this lever will not return to HOLD position, so it must be moved back by hand. Tilting control A LEFT TILT : ( e ) B RIGHT TILT : ( 3 ) 7. BLADE CONTROL LEVER (FOR DUAL TILT DOZER) This carries out the blade lift, tilt, dual tilt, and pitch operations. Lifting control a RAISE : ( 2 ) b HOLD : ( w ) Blade is stopped and held in this position. c LOWER :
( s ) d FLOAT : ( x ) Blade will move freely according to external force. REMARK When released from FLOAT position, this lever will not return to HOLD position, so it must be moved back by hand. Tilting control A LEFT TILT : ( e ) B RIGHT TILT : ( 3 ) 2-17