Optional Equipment - Section 6 Page 6-19 SETUP AND MAINTENANCE Speed Limit A warning can be displayed if the mac preset speed. The available range is: 10 - 99 km/h (6 recommended to set the speed limit t mph). Setting The Speed Limit 1. Press and hold the MODE switch until "Cd:dP" is flashing. 2. Press the MODE switch once The display will show: 3. Press the MODE switch once The display will show: 4. Press the MODE switch repeat edly until "SP.XX" is displayed. 5. Press the LIGHT/INC switch t change the "unit digit" to the desi 6. Press the TOTAL/SFT switch an the display will then indicate: 7. Press the LIGHT/INC switch t change the "tens digit" to the des 8.
Press MODE switch to return to tion. ANCE f the mac 9 km/h (6 eed limit t DE switch . tch once itch once ch repeat played. switch t o the desi switch an Setting the Option Code 1. Press and hold the MODE switch until "Cd:dP" is displayed. hine exceeds a 2. Press the MODE switch once The display will show: - 62 mph). It is 3. Press the MODE switch once o 99 km/h (62 The display will show: 4. Press the MODE switch repeat . . - edly until "OP.XX" is displayed. 5. Press the LIGHT/INC switch t change the "unit digit" to the desir . 6. Press the TOTAL/SFT switch an the display will then indicate: o ed number. d . 7. Press the LIGHT/INC switch t change the "tens digit" to the desi - 8.
Press the MODE switch to ret operation. o red number. urn to normal o 9. The Option Code selects the PLM red number. nication mode as follows: d ™ II commu- 2. The 530M/HD1500 with Powertrain Manage- ment Control (PMC) system uses "10" as the setting for the Option Code. 3. For trucks with Modular Mining System (MMS) or Scoreboard, the Option Code is "12". Option Code COMMUNICATION M ODE 0 Stand Alone 10 PMC Mode (530M/HD 1500 only) 12 Modular Mining Mode and User Data Comm Mode , Scoreboard unication