Service Manual Electrical System Avoid touching the bulbs with your fingers. Exposure to the salts and oils in your fingers can lead to premature bulb failure. Use cotton gloves if necessary. 24. Repeat for the second front signal light and set both aside for mounting later to the brushguard. 25. Locate the short wire harness for the front signal/running lights and con- nect it to the wiring of the previously mounting headlamps. Red to Blue, Yel- low to White and Black to Black Pho- tos 32 &33 27. Orient the bulb as in Photo 35 26. Install the halogen bulb to the headlamp lens. Photo 34 Ontario Drive & Gear Limited www.odg.com PH.(519)- 662-2840 FAX (519)- 662-2421 ES-25