• Correct the brake fluid level. • Wipe the rim of the reservoir, the rubber dia- phragm and the cover to remove brake fluid, and carefully reassemble the components. – Place the motorcycle on its centre stand. Checking clutch operating fluid level (Inspections II and III) e Attention: Keep the brake fluid in the clutch operating system away from painted surfaces on the motorcycle be- cause brake fluid attacks paint. • Place motorcycle on its centre stand . • Move the handlebars to the straight-ahead position . e BMW • Perform bleed test with BMW MoDiTeC. ( a 00.29) Required level with a new clutch liner: ...........................................Half way up sight glass • Install fuel tank.
L Note: As the clutch lining wears, the fluid level in the res- ervoir rises. Brake fluid ....................................................DOT 4 • If necessary, remove reservoir cap with insert. • Correct the fluid level. – Mark in reservoir: same as brake circuit. • Reinstall the reservoir cap with insert. • Tighten the reservoir cap carefully and without using force. Brake fluid ...................................................DOT 4 00.51 Attention: all the work on the brake system has been leted, run a bleed test using the MoDiTeC. R22000190 R22000190