System Error Codes System Error Codes Introduction The following pages contain a list of error codes and their respective descriptions and recommended corrective actions. Only try one recommended action at a time and check if the error code has disappeared. If you have an error code which is not documented in this Service Manual or you have an error which you cannot resolve, then report the error to the HP Response Center or the nearest HP Support Office. When reporting the error, have the following information ready: „ Model and Serial Number of the printer. „ Which firmware revision the printer is using. „ The complete error number. „ The Service Configuration Print .
„ The Current configuration sheet. „ Which software application the customer is using (name, version, etc.). Whenever an Error Message is displayed, you should try to switch the Printer Off and then On again to see if the error disappears. If the error disappears, there is no need to troubleshoot the Printer any further. 2-2 HP Designjet 9000s Series Printer Service Manual