System Error Codes System Error Codes A System Error Code appears on the Front Panel when a component of the Printer has failed during normal usage. Each System Error Code and it’s appropriate corrective actions are explained on the following pages. System Error: System Error 1110: GA_ATG Block Clear Error Problem Description: The ATG band memory block erase does not end. This error is checked during Boot-Up sequence and printing. Corrective Action: Try the following: „ Replace the Main PCA ⇒ Page 8-35 . System Error: System Error 1111: GA_ATG DMA Transfer Error Problem Description: There is a problem in the data path. This error is checked during printing. Corrective Action:
Try the following: „ Make sure that the host PC and the Printer are connected correctly via a USB Cable. „ Replace the Main PCA ⇒ Page 8-35 . System Error: System Error 112x: Vacuum Fan Error Problem Description: „ x = 0: The Vacuum Fan (Wiping Side) has failed. „ x = 1: The Vacuum Fan (Center of the Platen) has failed. „ x = 2: The Vacuum Fan (Capping Side) has failed. Corrective Action: Try the following: „ Replace the failing Vacuum Fan ⇒ Page 8-34 . „ If the error continues, replace the Main PCA ⇒ Page 8-35 . Problem Description: A time-out error occurs when the NVRAM contents are being saved in the flash memory in Maintenance Mode and erasing does not end. System Error:
System Error 1140: Flash ROM Write Error Corrective Action: Try the following: „ Replace the Main PCA ⇒ Page 8-35 . HP Designjet 9000s Series Printer Service Manual 2-7