Preparation and Simple Use Guide PREPARATION AND SIMPLE USE Follow the instructions on the Brother Quick Setup Guide to set up the machine. You can scan the document for copying from either the ADF (Automatic Document Feeder) or from the glass platen. 2 Setting the Document Using the ADF (Automatic Document Feeder) The automatic document feeder (ADF) can hold up to 30 pages, feeding each one individually through the machine. Use standard (75 g/m 2 ) paper when using the ADF. Always fan the pages well before placing them in the ADF. Recommended Environment Temperature: 20-30˚C (68-86˚F) Humidity:
50%-70% DO NOT use curled, wrinkled, folded, or ripped paper, or paper with staples, paper clips, paste or tape attached. DO NOT use cardboard, newspaper, or fabric. (To copy or scan this kind of document, see Using the Glass Platen , page 3.) I Make sure documents written with ink are completely dry. I Documents must be from 14.8 to 21.6 cm wide, and from 14.8 to 35.6 cm long. Fan the pages and stagger them at a 30 degree angle. Insert the pages face up , top edge first in the ADF until you feel them touch the feed roller. 1 2 Adjust the paper guides to fit the width of your pages. Pull up the document stopper. 3 Preparation and Simple Use Guide 1 1 Read the Quick Setup Guide