● Sliding regeneration: ● When the vehicle is running in D position, if you release the accelerator pedal at a certain depth, the motor will output reverse torque to decelerate the vehicle, and the generated energy will be recovered to improve the vehicle economy. REMINDER in high speed, as the driver may be distracted. This may obstruct the control of the vehicle, resulting in accidents. ● During driving, energy is recovered through regenerative brakes when the vehicle decelerates. For higher efficiency, do not accelerate or decelerate the vehicle unnecessarily.
Battery Power Battery and Charging System ● The energy regeneration intensity can be set with the regenerative mode button or on the infotainment touchscreen. ● The vehicle is powered by a high- voltage battery that can be charged and discharged repeatedly. The high- voltage battery is charged by an external power source or through energy recovery when the vehicle brakes or coasts. ● Standard: When the accelerator pedal is released, the motor controller recovers energy in the standard level, and the vehicle deceleration is in the standard level. ● High: When the accelerator pedal is released, the motor controller recovers more energy, and the vehicle deceleration is high.
● The high-voltage battery is located under the vehicle floor, so be careful and slow down to avoid bumping when driving on bumpy or uneven roads. If bumping occurs, go to a BYD authorized dealer or service provider for maintenance. ● The corresponding settings can be made in infotainment system → → New Energy → Energy Management → Energy Regeneration Mode. Battery Properties ● You can select the regeneration intensity based on the deceleration sense when releasing the accelerator pedal. Different deceleration senses deliver different driving experiences.
● It is normal that vehicle performance is affected by battery electrochemical properties and self-protection and varies to some extent in the following conditions: ● The set energy regeneration intensity will be memorized. When the vehicle is powered off and then on, the regenerative braking mode set last time will be maintained. ● When SOC is high, the regenerative braking performance may decline. ● The vehicle switches to trickle charging mode at high SOC. If the charging time is prolonged, the estimated remaining charging time displayed on the instrument cluster may not be accurate. REMINDER ● Do not set the regeneration intensity when driving the vehicle 94