5-2-2 Installation to Screen This IAG Collection assumes the following usage. When the button for the ETAP device on the DLR SuperVisor, which is displayed by the IAG “EtherNet_IP_Network Monitor” located on another page, is pressed, the screen switches to the page with this IAG and then this IAG accesses to the device to receive and display the necessary information. When you press the EIP Monitor button in this IAG, the screen switches to the previous page, where the IAG “EtherNet_IP_NetworkMonitor” is placed. Do the following work when making this design.
Events and Actions settings for IAG “EtherNet/IP NetworkMonitor” Set the action “ShowPage” for the event “SelectETAP” in the IAG “EtherNet_IP_NetworkMonitor” and enter the page name in which this IAG is placed. Property Assignment for IAG “EtherNet/IP NetworkMonitor” Assign the following properties (Input/Output) of IAG “EtherNet/IP NetworkMonitor” to the following variable. Property Assignment for IAG “DLR Monitor” Assign the following properties (Input/Output) of this IAG to the following variable. The IP address information is shared by this operation. 28 Event Description SelectETAP Executed when an ETAP device is selected. Enter the name of the page where the IAG is placed.
Property (Input/Output) Description Variable Name Data Type SelectDeviceIPAddress IP address of the displayed unit SelectDeviceAddress String Property (Input/Output) Description Variable Name Data Type SelectDeviceIPAddress IP address of the displayed unit SelectDeviceAddress