Screen Specifications 14 IO-Link Master Status Screen Displays the information of the IO-Link master unit whose IP address is notified externally. 1 2 3 4 5 6 7 8 9 8 9 10 11 12 User I/F Specifications No. Part Description 1 DataDisplay Name of the displayed device. 2 DataDisplay Displays the IP address of the IO-Link master unit. 3 DataDisplay Port number of the selected device is displayed. 4 Button Reads the configuration out. 5 Group Units’ information is shown. Refer to No. 10 and later for details. 6 Button The LED that indicates the location of the IO-Link master unit on the screen is lit when this button is pressed. It is for expansion and not shown in the actual NA.
7 Button Displays Device Information Window. 8 DataDisplay Displays pin modes of Pin4 (upper) and Pin2 (lower) for each IO-Link port as the following. Pin4: Any of DI, DO, or Failed to read Pin2: Any of Disabled, DI, DO, or Failed to read 9 Button WordLamp Displays statuses of Pin4 (upper) and Pin2 (lower) for each IO-Link port as the following. Pin4: Any of ON, OFF, Error, or Failed to read Pin2: Any of ON, OFF, Error, or Failed to read Pressing the button while Error is being displayed executes the event ShowPortStatusEvent. 10 Lamp Displays IO-Link condition. 11 Lamp Displays the condition of the input power supply voltage.
12 Lamp Displays the condition of the output power supply voltage. Layout Properties Default Description Position (Left, Up) Set in Property. ▼Size (Width, Height) Set in Property. 3 4 6 8 9 8 9 11 12