Controller_NA_Practices_Guide_NJ/NX/NA-series_Backup_and_Restore_IAG_EN_202004_V127I-E3-01 (EN)

Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG

Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG NA5-15  101  NA5-12  101  NA5-9  001  NA5-7  001  V127I-E3-01

Стр. 1

Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG

NOTE 1. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior written permission of OMRON. 2. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because OMRON is constantly striving to improve its high-quality products, the infor- mation contained in this guide is subject to change without notice. 3. Every precaution has been taken in the preparation of this guide. Nevertheless, OMRON assumes no responsibility for errors or omissions.

Neither is any liability assumed for damages resulting from the use of the information contained in this publication. • Sysmac and SYSMAC are trademarks or registered trademarks of OMRON Corporation in Japan Trademarks and other countries for OMRON factory automation products. • Microsoft, Windows, Excel, and Visual Basic are either registered trademarks or trademarks of Mi- • EtherCAT ® is a patented technology and registered trademark, licensed by Beckhoff Automation crosoft Corporation in the United States and other countries. GmbH, Germany. • ODVA, CIP, CompoNet, DeviceNet, and EtherNet/IP are trademarks of ODVA. • The SD and SDHC logos are trademarks of SD-3C, LLC.

• Portions of this software are copyright 2014 The FreeType Project (www.freetype.org). All rights reserved. Other company names and product names in this document are the trademarks or registered trade- marks of their respective companies. Copyrights • Microsoft product screen shots reprinted with permission from Microsoft Corporation.

Стр. 2

Applicable Products

Introduction Introduction Thank you for purchasing an NA-series Programmable Terminal. This guide contains information that is necessary to use the NJ/NX/NA-series Backup and Restore In- telligent Application Gadgets (hereinafter, referred to as "IAG"). Please read this guide and make sure you understand the functionality and performance of the NA-series Programmable Terminal before you attempt to use it in a control system. This guide provides specifications of the IAGs. It does not include restrictions on the Programmable Terminal, connected Controllers, other Units, related components, or combination of those. Make sure to read the user's manual for each product before use.

Keep this guide in a safe place where it will be available for reference during operation. Library Features The NJ/NX/NA-series Backup and Restore IAGs are provided as a library to support the following functions. • To save user programs and configuration data from NJ/NX-series CPU Units and the NA-series Pro- grammable Terminal. (This is referred to as a backup.) • To restore the saved data to NJ/NX-series CPU Units and the NA-series Programmable Terminal. (This is referred to as a restore.) Using these functions allows you to restore the original state of your system in case it becomes unsta- ble after some changes are made.

Intended Audience This guide is intended for the following personnel. They must also have knowledge of electrical systems (an electrical engineer or the equivalent). • Personnel in charge of introducing FA systems. • Personnel in charge of designing FA systems. • Personnel in charge of installing and maintaining FA systems. • Personnel in charge of managing FA systems and facilities. Applicable Products For details on this library and models and versions of relevant NJ/NX-series CPU Units, NX-series Safety Control Units, NA-series Programmable Terminals, and the Sysmac Studio, refer to 2-2 Target Devices and Configuration on page 2-14.

Part of the specifications of and restrictions on those products are given in other manuals. Refer to Related Manuals on page 16. 1 Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG (V127)

Стр. 3

Special Information

Guide Structure Guide Structure Page Structure The following page structure is used in this guide. Level 1 heading Level 2 heading Level 3 heading Level 2 heading Level 3 heading Gives the current headings. Indicates a procedure. Page tab Gives the number of the main section. Special information Icons indicate precautions, additional information, or reference information. Guide name Note This illustration is provided only as a sample. It may not literally appear in this guide. Special Information Special information in this guide is classified as follows: Precautions for Safe Use Precautions on what to do and what not to do to ensure safe usage of the product.

Precautions for Correct Use Precautions on what to do and what not to do to ensure proper operation and performance. 2 Programmable Terminals NA-series Practices Guide NJ/NX/NA-series Backup and Restore IAG (V127) g g cedure ure. ion ional erence 4 Installation and Wiring L L L G h 4

Стр. 4