PAINT TREATMENT Paint treatment ΞΦ95 series 0 Paint repairing of cab top coat and SMC polyester parts 1. Remove any preserving agents, if applicable; see "General operations". 2. Remove any rust with a rust-removal agent. 3. Clean the area to be repaired with a solvent. 4. Sand the area to be repaired first with P80 sand paper and then with P180 sand paper. 3 5. Remove any dust from the sanded section with a Tack-rag cloth. 6. Fill the area to be repaired. 7. Sand the filled area with P180 sand paper. 8. Fine-sand/roughen the area to be sprayed with 3M Scotch Brite ultra fine or an equivalent product. 9. Remove any dust from the sanded section with a Tack-rag cloth. 10.
Clean the area to be sprayed with a solvent. 11. Apply a primer. 12. Leave the primer to evaporate/dry. 13. Apply a filler. 14. Leave the filler to evaporate/dry. 15. If necessary, fine-sand with 3M Scotch Brite ultra fine or an equivalent product. Following fine-sanding, remove any dust with a Tack- rag cloth and clean the area with a solvent. 16. Apply the top coat according to the manufacturer's instructions. 17. Leave the top coat to evaporate/dry. Observe the drying time as laid down in the manufacturer's instructions. 1-4 © 200651