DPO6000, MPO6000 Series Digital Fluorescent Oscilloscope Product Manual V1.3 Function menu 17 cator does not light up when the menu is not operated. The operation is that the mul- ti-function indicator is on. Turn the knob to adjust the settings listed above. Turn clockwise to increase and counterclockwise to decrease. Press the knob to select this option. Default: Press the key briefly to execute the corresponding default setting. Long press this key to enter the Default function preset, you can choose facto- ry settings, default settings, user settings. Help: Press this key to open and close the built-in help system. Utility: Press this key to enter the system function setting menu.
Set system related functions or parameters, such as interface, sound, language, etc. In addition, some advanced features are supported, such as pass / fail tests. Cursor: Press this key to enter the cursor measurement menu. The oscilloscope pro- vides two cursor modes: manual and tracking. Measure: Press this key to enter the measurement setting menu. You can set the meas- urement data source, turn the digital multimeter on or off, all measurements, and statistics functions. Press “All Measurements” to open the measurement of 42 waveform parameters, and the measurement results will appear at the bot- tom of the screen. Save/Recall:
Press this key shortly to enter the file storage and recall interface. The types of files that can be stored include: setup, waveform, reference, CSV. Supports internal and external storage and disk management. Long press this key to save the picture in .bmp format to external storage. Display: Press the key shortly to enter the display setting menu. Set the waveform dis- play type, afterglow time, waveform brightness, screen grid and grid bright- ness. Press and hold this key to clear the afterglow, and then collect or count again.