:TRIGger:SLOPe:POLarity For example :TRIGger:SLOPe:POLarity POSItive /*Set positive slope trigger*/ :TRIGger:SLOPePOLarity? /*The query returns POSItive*/ :TRIGger:SLOPe:WHEN For example, :TRIGger:SLOPe:WHEN NLESs /*Set trigger condition to NLESs*/ :TRIGger:SLOPe:WHEN? /*The query returns NLES*/ :TRIGger:SLOPe:TIME0 72 / 136 Command format :TRIGger:SLOPe:POLarity :TRIGger:SLOPe:POLarity? Function description Set or query the trigger polarity of the slope trigger Parameter Name Type Range Default Integer POSItive Description POSItive: Positive slope trigger NEGAtive:
negative slope trigger Return format The query returns POSItive, NEGAtive Command format :TRIGger:SLOPe:WHEN :TRIGger:SLOPe:WHEN? Function description Set or query the trigger condition of the slope trigger. Parameter Name Type Range Default Discredit { EQUAl| NEQUal| GREAt| LESS } EQUAl Description EQUAl = (equal to time value): Only when the positive or negative pulse width of the input signal is equal to the set pulse width can it trigger. [Pulse width error is 5%] NEQUal! = (Not equal to time value): Only when the positive or negative pulse width of the input signal is not equal to the set pulse width, can the [pulse width error be 5%] be triggered. GREAt ＞ (greater than the time value):
Only when the positive or negative pulse width of the input signal is greater than the set pulse width can it trigger [pulse width error is 5%]. LESS Return format The query returns EQUAl, NEQUal, GRAt, LESS Command format :TRIGger:SLOPe:TIME :TRIGger:SLOPe:TIME? Function description Set or query the trigger condition of the slope trigger. Parameter Name Type Range Default Interger 8ns to 10s 20ns