:TRIGger:IIC:CONdition START /*Set START */ :TRIGger:IIC:CONdition? /*The query returns START*/ TRIGger:IIC:ADDRess For example, :TRIGger:IIC:ADDRess 100 /*Set the address value to 100*/ :TRIGger:IIC:ADDRess? /*The query returns START 100*/ Related commands :TRIGger:IIC:AWIDth TRIGger:IIC:DATA For example, : TRIGger:IIC:DATA 2 10 /* Set the data with index 2 to 10*/ : TRIGger:IIC:DATA? /* The query returns 10*/ :TRIGger:IIC:VALId? For example, :TRIGger:IIC:VALId 0 1 /* Mask data with index 0 */ :TRIGger:IIC:VALId? 0 /* The query returns 1*/ 98 / 136 Command format :TRIGger:IIC:ADDRess :TRIGger:IIC:ADDRess?
Function description Set or query the address value when the IIC trigger condition is an address or address data. Parameter Name Type Range Default Integer 0 to 2n-1: 0 to 127, 0 to 255 or 0 to 1023 1 Description In the expression 2n-1, n is the current address bit width. Return format The query returns an integer. Command format :TRIGger:IIC:DATA :TRIGger:IIC:DATA? Function description Set or query the data value when the IIC trigger condition is data or address data. Parameter Name Type Range Default Integer 0 to 240-1 82 Description The settable range of is affected by the byte length setting. The maximum byte length can be set to 5, which is 40-bit binary data.
Therefore, the value range of is 0 to 240-1. Return format The query returns an integer. Command format :TRIGger:IIC:VALId? Function description Set or query IIC trigger data mask Parameter Name Type Range Default : ::= 0—7 : ::= 1 Return format The query returns 0,1.