CANopen Communication Module DVPCOPM-SL 4.3 How to Configure Network by Delta CANopenBuilder Software l Using CANopenBuilder to scan the network (1) Open CANopenBuilder software, as below: (2) Select ” Setup ” => ” Communication Setting ” => ” System Channel ” , and the "Serial Port Setting ” dialog box will appear. (3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud rate and communication format.
DVP-PLC Application Manual 11 D register 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Input data D6036 Multi-function digital output Output data D6286 Multi-function digital input Item Function Default COM Port COM port on the PC to be used to communicate COM1