DeviceNet Network Scanner DVPDNET-SL 3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud rate and communication format. Click on “OK” after configuration is finished. 4) Select “Network” => "Online” and the “Select Communication Channel” dialog box will appear. Click on “OK” to start scanning the entire DeviceNet network. 5) After scanning is successful, right click DNET (Slave) to select “Parameter editing”.
DVP-PLC Operation Manual 29 Item Function Default COM Port COM port on the PC to be used to communicate with DVP-SV COM1 Address Communication address of DVP-SV 01 Baud rate Communication speed between the PC and DVP-SV 9,600 (bps) Data Bits Communication protocol between the PC and DVP-SV 7 Parity Even Parity Stop Bit 1 Mode Communication mode between the PC and DVP-SV ASCII