Chapter 3 Featured Functions IPv4 Network Interface Configuration 3.1.2.2 IPv6 Network Configuration If you need to configure a global IPv6 address, please follow the standard format: “IPv6 Prefix/Prefix Length”. For example: “1001:2002:3003::7007:8008/64” Global Configuration 3-7 Description Factory Default IP Address Input the IP address of the IPv4 network interface. Note: After you input the new IP address of IPv4 and click Apply, we suggest you that reopen a web browser to re-log in. Make sure the URL you input is the new IP address. 192.168.1.5 Subnet Mask Input the IP subnet mask of the IPv4 network interface. 255.255.0..
Default Gateway Input the default gateway of the IPv4 network interface. 0.0.0.0. MAC Address This field displays the MAC address of the switch. MAC address Current Network Configuration Protocol Select one item to specify how the switch gets its IP information: None: Specify static IP address information. DHCP: The IP information of the switch is assigned from a Dynamic Host Configuration Protocol (DHCP) server on the network. BOOTP: The IP information of the switch is assigned from a Bootstrap Protocol (BOOTP) server on the network. None Management VLAN ID Input the management VLAN ID in the range from 1 to 4094.
1 Description Factory Default Admin Mode Specify the IPv6 administrative status of the network interface by selecting one item: Disable: IPv4 only mode. Only support IPv4, not support IPv6. Enable: IPv4 / IPv6 mode. Support both IPv4 and IPv6. Enable IPv6 Gateway Input the IPv6 address of the IPv6 gateway. None