DVS-108 Series Managed Industrial Ethernet Switches User Manual SNTP Scalars Configuration Note: 1. After you have clicked Apply, the date and time are applied and the fields revert to their default setting of DD/MM/YYYY and HH:MM:SS. 2. The manual date and time setting will be lost after the switch is rebooted, even if you have saved the changes 3.1.4.2 SNTP Unicast Server Configuration If you want to specify a known SNTP server, you can enter the IP address or DNS in this page.
3-12 Description Factory Default SNTP Client Status Specify whether the switch works as an SNTP client, and the switch will send an NTP request to the server which the user specify in SNTP Unicast Server Configuration page. Enable: The switch works as an SNTP client. Disable: The switch doesn’t work as an SNTP client. Disable SNTP Server Status Specify whether the switch works as an SNTP server. Enable: The switch works as an SNTP server. Disable: The switch doesn’t work as an SNTP server. Disable Date The date parameter format is DD/MM/YYYY. When an SNTP client is disabled, you can manually set the date. When an SNTP client is enabled, the field is grayed out.
DD/MM/YYYY Time The time parameter format is HH:MM:SS. When an SNTP client is disabled, you can manually set the time. When an SNTP client is enabled, the field is grayed out. HH:MM:SS Time Zone The time zone setting format is HH:MM is preceded by a plus (+) or minus (-). For example, for Taipei, enter +08:00. And it allows conversion from GMT (Greenwich Mean Time) to the local time. +00:00 DST StarTime Enter the daylight saving time (DST) start time. Specify the date and time in the following format: week of the month-day of the week-month-HH:MM For example, if DST starts on the first Saturday in May at 03:00 AM, enter the following format: First-Sat-May,03:00.
None DST EndTime Enter the daylight saving time (DST) end time. Specify the date and time in the following format: week of the month-day of the week-month-HH:MM For example, if DST ends on the second Monday in December at 04:00 AM, enter the following format: Second-Mon-Dec,04:00. None