Chapter 3 Featured Functions LAG Settings 3.1.4 Time The switch supports SNTP (Simple Network Time Protocol). It can work as an SNTP client to get time from an SNTP or NTP server, and it also can work as an SNTP server to provide time service and send a time reply to a client. 3.1.4.1 SNTP Scalars Configuration The SNTP Scalars Configuration lets a user to configure the time of the switch which gets from SNTP server or not. And it also can be configured manually. 3-11 Description Factory Default Port This field shows the interface number. interface number Link Status This filed show the connection of the interface. Link Up: The interface is connected to another device. Link Down:
The interface is not connected to another device. Link Down Admin Mode Specify the administrative state of the interface: Enable: The interface is switched on and can be connected to another device. Disable: The interface is switched off and cannot be connected to another device. Enable Jumbo Frame The filed displays whether jumbo frame is enabled for the port. Enable: Jumbo frame is enabled. The switch supports a fixed jumbo frame size - 9000 bytes payload (9018 bytes frame) size. Disable: Jumbo frame is disabled. Disable Link Trap Specify whether the switch sends a trap when the interface link status changes: Enable: When the link status changes, the switch sends a trap.
This is the default setting. Disable: When the link status changes, the switch doesn’t send a trap. Enable