DVS-108 Series Managed Industrial Ethernet Switches User Manual 3.1.5.1 DHCP Server If the DHCP server is enabled on the switch, it can assign an IP address which is in the same network as the switch to the client. DHCP Server Configuration You can enable or disable the DHCP server function and configure the DHCP configuration in this page. DHCP Server Configuration 3-14 Description Factory Default Admin Mode Specify the status of the DHCP server on the switch: Disable: The DHCP server is disabled. When you want to enable the DHCP relay function, please select this setting. Enable: The DHCP server is enabled. Disable Next Server Specify Boot server host name.
0.0.0.0 Boot File Specify Boot file name. None Network Enter the network for the DHCP pool. None Subnet Mask Enter the IP subnet mask for the DHCP pool. None Lease Time Type Specify the type of lease time: Specified Duration: The leased IP address has a specific duration. You need to specify the duration in the Lease Time fields. Infinite: The leased IP address does not expire. None