DVS-108 Series Managed Industrial Ethernet Switches User Manual 3.1.9.2 Port Configuration The parameters of Loopback-Detection should be set for each port. Loopback-Detection Port Configuration 3-34 Description Factory Default Interface The interface number interface number Port Control Enable/Disable the Loopback-Detection feature on the port. Disable Recovery Mode There are two recovery modes for recovering the blocking port. Loops occur as the reason for blocking the port Auto Mode: After the port is blocked, the port will be automatically linked up after a Recovery Interval. Manual Mode: After the port is blocked, we have to manually enable the port.
Basic Setting > Port Setting > Port Settings (Admin Mode), enable the blocking port. Manual Recovery Interval In the Auto Mode, the blocking port will be linked up after a Recovery Interval. The unit is a second. 300