Select tuning function screen (setting all/ individual setting) Settings selection display, Select workpiece screen Trend graph screen Additional Information For details on how to monitor and set each screen, refer to Section 6 External Specifications of E3NW-ECT Window (for NJ) in this guide. 13 Function Remarks Performs each tuning to the selected sensor amplifier. There is no difference in function between individual setting and setting all. Since tuning functions vary depending on the model of sensor amplifiers, make sure that the same model of sensor amplifier is selected when performing the tuning all.
Function Remarks Reads the settings of the selected sensor amplifiers (Settings Selection Display) or all the connected sensor amplifiers (Select workpiece screen) into the PLC memory, or writes to amplifier. “Settings Selection Display” is moved from “Detailed Settings Screen 1”. “Select workpiece screen” is moved from the “Monitor screen”. Function Remarks Displays the incident light (PV-value) and threshold (SV-value) of the selected sensor amplifiers as a graph. Only input 1 of the incident light (PV-value) and threshold (SV-value) can be displayed as a trend graph.