51 11 Click ”Project ”->”Build HMI” or press down the “F8” key to execute build and make sure that build ends normally. If a build error occurs, correct the project by following the message displayed in the Build Tab Page. 12 Click “HMI”->”Online” to connect the NA online with PC. If OS for the NA needs to be updated, a pop-up will appear. Follow the direction to update OS. 13 Select “Synchronization” and click the “Transfer to Device” button to transfer the project to the NA. If OS was updated in step 12, connect the NA online with PC again, perform the synchronization, and transfer the project to the NA.