Software Notes on assignments and store commands Ш Assignments (=...) Assignments write the contents of the accumulator into the specified operand. Ш Set command (S) Writes “logical 1” into the specified operand if the prece- ding operation in the accu resulted in “logical 1”. There is no influence on the operand if the result in the accu was “logical 0”. Ш Reset command (R) Writes “logical 0” into the specified operand if the prece- ding operation in the accu resulted in “logical 1”. There is no influence on the operand if the result in the accu was “logical 1”. 54