Setting up the Network 5.5. Connect online with the RSLogix5000 and transfer the project data to the Controller. Configure RFID System within the Network 5.5.1. 13 1 Once the Ethernet Bridge is part of the configuration, the Generic Ethernet Module can be added. To add the module, Right Click - New Module. In the Select Module Type window, Create Ethernet – Module Generic Ethernet Module 2 In the New Module window, enter Name, Comm Format, Address/ Host Name, and Connection Parameters (see below.) In this application: Name: V680S Comm Format: Data – SINT IP Address: 192.168.1.200