Compatibility Compatibility This guide is for use with eV+ systems 2.x and later. This guide provides reference material and descriptions of keywords for the eV+ operating system. For information on the eV+ programming language, see the eV+ Language User's Guide and the eV+ Language Reference Guide. See the eV+ Release Notes for a summary of changes for each system version. Licenses The eV+ operating system software requires the appropriate "eV+ Version" license to be installed in the SD Card. If the correct license is not installed, the system displays *Protection Error* when the eV+ system is booted from disk.
In that case, the system provides only the functionality required to install the missing license; all other functionality is disabled until the correct license is installed. The controller is supplied with the ACE software, which is used to communicate with the controller and share files between your PC and the controller. For more details on the ACE software, see the ACE User's Guide. Related Publications This reference guide is a companion to the eV+ Operating System User's Guide , which covers the principles of the eV+ operating system. In addition, you should have handy the manuals listed in the following table. All of the manuals are available in the Adept Document Library.
For more information, visit the Adept Document Library on the Omron Adept website: http://www.adept.com/main/ke/data/adept_title_index.htm Related Publications eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 20 Manual Material Covered ACE User's Guide Describes the ACE user interface, which is used for configuration, control, and programming of the Omron Adept robot system. ACE Sight User's Guide Describes the interface, use, and programming of the optional ACE Sight vision system. SmartController EX User's Guide This manual details the installation, configuration, and maintenance of your SmartController EX. The controller must be set