DIRECTORY monitor command DIRECTORY monitor command Syntax DIRECTORY /switch wildcard_spec Function Display the names of some or all of the programs in the system memory. Usage Considerations This command lists the programs resident in system memory. It does not list the files on a disk drive. The FDIRECTORY command lists the files on a disk drive. Parameters switch Optional qualifier whose possible values are: wildcard_spec Optional character string that can include wildcards using either the "?" or "*" character. Both wildcards operate identically and can match 0, 1, or multiple characters. Details The following information can be displayed for each program listed:
l A question mark ("?") is shown at the left if the program cannot be executed. This usually indicates that the program contains a programming error. l For any program name that is displayed, if the copy in memory has been modified since last being loaded or stored, an M is displayed before the program name. l If the program has restricted access, a code letter for the type of restriction is shown eV+Operating System Reference Guide, 2.x,18321-000 Rev A Page 74 Switch Value Purpose /S Suppress protected programs /? Display only nonexecutable programs /M Display only modified programs